{"product_id":"bilt-hamber-phat-neut-rinseless-wash","title":"Bilt Hamber PHAT-NEUT Rinseless Wash","description":"\u003cp\u003eBilt-Hamber Laboratories introduces Phat-Neut\u003csup\u003e®\u003c\/sup\u003e, a breakthrough pH-neutral (pH 7) multi‑mode “rinse-less” vehicle cleaner engineered to remove real‑world road film more effectively than traditional alkaline or caustic traffic film removers, while remaining safe on all vehicle surfaces.\u003c\/p\u003e\n\u003cp\u003eUnlike conventional rinse-less washes shampoos and neutral cleaners that trade safety for reduced cleaning power, Phat-Neut\u003csup\u003e®\u003c\/sup\u003edelivers genuine traffic‑film removal without solvents, salts, or aggressive alkalinity. Use as a rinseless wash, pump, trigger or pressure washer applied pre‑wash, wheel cleaner, or targeted contamination remover for insects, bird lime, and general road grime.\u003c\/p\u003e\n\u003cp\u003eAt the core of Phat-Neut\u003csup\u003e®\u003c\/sup\u003e is Lift‑Mode® Technology, initiated by low surface tension that enables encapsulation of contamination, and  lifting it away from the surface rather than chemically attacking the substrate. This allows heavy soil to be removed safely from paint, coatings, plastics, rubber, aluminum, glass, and sensitive finishes without marring or degradation. This method is distinctly different from either caustic high-power cleaners or gimmick based flocculating rinse-less washes. Flocculation chemically forces smaller particles to clump together – its used to clear treatment water at a water treatment works and while the effect looks impressive for a waterless wash as the bucket “water” is clear, and indeed BH made trial formulations, it is not appropriate for these products.   The flocculation begins even on the painted surface and the formation of large, agglomerated masses dragged across the paint by a sponge is not desirable.      Rather a RW should properly encapsulate particles, surround them and suspend.    The longer this can occur the safer the paint.   Correct surfactant blends are the key.\u003c\/p\u003e\n\u003cp\u003ePhat-Neut\u003csup\u003e®\u003c\/sup\u003e also employs a unique optional Dry‑On\u003csup\u003e® \u003c\/sup\u003eMode, where the product is intentionally allowed to dry on the surface. As water evaporates, Lift-Mode\u003csup\u003e® \u003c\/sup\u003ecleaning activity intensifies, further breaking the bond between road film and the surface before being wiped or rinsed away. This makes Phat-Neut\u003csup\u003e®\u003c\/sup\u003e exceptionally effective in warm conditions and panels (even up to  50 °C), or where water availability is limited.\u003c\/p\u003e\n\u003cp\u003eWith no hazard or precautionary labelling and full compatibility with waxes, sealants, and ceramic coatings, Phat-Neut® redefines what is achievable from a pH‑neutral cleaner.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow to Use\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eOptimum method for vehicles with dirty lower panels\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFor a vehicle with heavy dirt on the lower panels, wheels and sills, and lighter contamination on the upper\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003epanels, use a combined Dry-On® and Lift-Mode® process.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e1. Test first\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eUse the Dry-On® suitability test on the dirty lower panels or target area.\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eOnly proceed with Dry-On® if the dirt film is heavy and absorbent enough for the drop to spread into the \u003c\/span\u003e\u003cspan\u003econtamination.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e2. Pre-treat the dirtiest areas with Dry-On®\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eApply Phat-Neut® at 2-4% to wheels and heavily soiled lower panels.\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eAllow it to visibly dry into the dirt film.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e3. Treat the upper panels with Lift-Mode®\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eThen apply Phat-Neut® to the upper panels using Lift-Mode®. \u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eWork from the upper panels downwards, applying over the Dry-On® pre-treated areas as you come down the \u003c\/span\u003e\u003cspan\u003evehicle.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e4. Rinse or continue with bucket wash\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eFor best results, pressure wash or rinse immediately after the wet application of Phat-Neut® has been \u003c\/span\u003e\u003cspan\u003eapplied.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eWhere pressure rinsing is not available, the dirt will now be very loose. Rinse at low pressure if possible, then \u003c\/span\u003e\u003cspan\u003eclean using the Phat-Neut® bucket method to remove the released dirt film safely and fully. If low pressure \u003c\/span\u003e\u003cspan\u003erinsing is not available, the bucket method will still be much safer than alternative wash methods.\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow to use Dry-On® correctly\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e1. Shake and mix properly\u003cbr\u003e\u003cspan\u003eShake the bottle well for 10 seconds before use.\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eAfter adding Phat-Neut® to water, mix or shake the dilution vigorously for 20 seconds. Phat-Neut® is highly \u003c\/span\u003e\u003cspan\u003econcentrated and must be fully dispersed before application.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e2. Apply to heavy dry dirt film\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eUse 2-4% dilution, equivalent to 1:50 to 1:25.\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eApply using a pump sprayer, preferably, or a trigger spray.\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eApply only to heavy dry dirt film. Do not apply Dry-On® mode to clean or lightly soiled areas.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e3. Allow to visibly dry into the dirt film\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eAllow Phat-Neut® to visibly dry into the dirt film.\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eThis drying stage is what increases cleaning power. The product should be drying into contamination, not onto \u003c\/span\u003e\u003cspan\u003ebare exposed finish.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e4. Rinse immediately after drying\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eOnce visibly dry, rinse immediately.\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003ePressure rinsing is preferred. Where pressure rinsing is not available, low-pressure rinsing may be used, \u003c\/span\u003e\u003cspan\u003efollowed by the bucket-stage wash to remove the released dirt film safely and fully.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e5. Continue with the normal wash if required\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eAfter rinsing, continue with a normal wash or rinseless bucket stage if required.\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eFor rinseless washing, use Phat-Neut® at 0.4% in the bucket, or 0.5% where extra lubrication is wanted. Do \u003c\/span\u003e\u003cspan\u003enot use Dry-On® during the rinseless wash stage.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cbr\u003e\u003cstrong\u003eWhy Dry-On® is different\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eMost neutral-pH cleaners rely heavily on contact, agitation, or weak surfactant cleaning. Phat-Neut® is \u003c\/span\u003e\u003cspan\u003edesigned to remove real exterior traffic film at neutral pH using very low surface tension and lubricious \u003c\/span\u003e\u003cspan\u003eencapsulation.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLift-Mode® helps wet, lift and isolate contamination from the surface.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eDry-On® extends the cleaning action in heavy dirt film, allowing Phat-Neut® to work deeper into the \u003c\/span\u003e\u003cspan\u003econtamination before rinsing.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis is why Dry-On® should be tested on genuine traffic film, not artificial dirt, interior trim, or subjective \u003c\/span\u003e\u003cspan\u003efoam\/slickness comparisons.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003e\u003cbr\u003eSize:\u003c\/strong\u003e 1 Litre\u003c\/span\u003e\u003c\/p\u003e","brand":"Bilt Hamber","offers":[{"title":"1 Litre","offer_id":56142364606804,"sku":null,"price":18.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0935\/4788\/8980\/files\/IMG-6743.webp?v=1781701676","url":"https:\/\/macsautodetailing.co.uk\/products\/bilt-hamber-phat-neut-rinseless-wash","provider":"Macs Auto Detailing","version":"1.0","type":"link"}