Koch Chemie Micro Cut M2.02

Micro Cut M2.02 is a machine micro-polishing agent that will help to permanently remove swirls, holograms, and fine scratches. The polish will also remove sanding from 4,000 grit on all (including scratch-resistant) paint systems. 

Leaves behind a brilliant and long-lasting high-gloss finish even on dark colours under extreme lighting conditions by using highly specialised, extremely homogeneous abrasives. Holograms and fine scratches are eliminated mechanically.

Micro Cut M2.02 is extremely economical, easy to polish and can be removed without leaving any residue.

• Grinding level: 2.5
• Gloss level: 9.0

Recommendations for use

To achieve optimal results, use with a Koch Chemie Micro Soft Pad and a high-performance eccentric (min. 15 mm stroke) or with an eccentric with forced rotation. Distribute evenly over the surface of the pad for optimal dosing. Distribute the polish evenly over the surface with the machine at the lowest speed and then polish crosswise with medium pressure until a transparent film is formed (i.e. until the aluminium oxide contained has completely disintegrated). Buff with a microfibre cloth to remove residues. 

Do not use the pads used for this product with other products.

Areas of use

• Paints on cars, commercial vehicles, motorcycles, etc.

Warnings

• Shake before use.
• Check for suitability and compatibility before use.
• Do not apply to hot surfaces.
• Protect from frost and excessive heat.
• Do not use on painted plastics and rubber.